Skip to content
Rated ★★★★★ on Trustpilot
Free UK mainland delivery on orders over £200
Help Centre Inspiration EGGER Samples FluteSlat™ Samples
TV Backboard in Sand Beige Calcit Stone - LUXE SUPPLIES
TV Backboard in Sand Beige Calcit Stone - LUXE SUPPLIES
Pre-assembled Floating Wall Unit with 4 Cupboards - 1.6m Width - LUXE SUPPLIES
TV Backboard in Sand Beige Calcit Stone - LUXE SUPPLIES
TV Backboard in Sand Beige Calcit Stone - LUXE SUPPLIES
Pre-assembled Floating Wall Unit with 4 Cupboards - 1.6m Width - LUXE SUPPLIES

TV Backboard in Sand Beige Calcit Stone

Made in Britain
£229.00 - £379.00
£0.00
£229.00 - £379.00
£229.00 - £379.00
£229.00

A TV backboard turns a plain, bracket-mounted TV into a proper feature wall, hiding the cables and bracket for a clean, built-in look. Sand Beige Calcit Stone (F661 ST76) combines a warm sand-beige tone with the subtle authenticity of stone, and has a genuinely rough, textured surface.

Why choose this backboard:

  • Genuine Egger, sustainably sourced from the UK - as used in Howdens & Wren Kitchens
  • Finished with matching edging
  • Scratch and moisture resistant
  • 18mm thick, 20cm border
  • Sizes to fit every TV, 50" to 100"

Order a sample in this finish here.

This listing is for the TV backboard only. Other components shown in the product image are sold separately.

TV Size
Trustpilot

Free Delivery | 7-10 working days lead time

Once your item is ready you will receive an email with your delivery slot and tracking information. Free delivery to UK mainland only.

Fitting Instructions for TV Backboard

Tools & Materials Needed:

  • Drill and appropriate drill bits
  • Screws (at least 6 recommended)
  • Screwdriver or impact driver
  • Spirit level
  • Stud finder
  • Measuring tape
  • Timber for framing (2x1 dressed timber or similar)
  • Wall anchors (if not fixing into studs)
  • LED strip kit (optional)
  • TV wall bracket (optional)
  • Saw/router for cable access hole
  • Pencil and masking tape for marking

1. Electrical Preparation

  • Install a power socket: Ensure a socket is installed at the desired height and location on the wall where your TV will plug in.

  • Mark and router a cable access hole: On the backboard, choose a spot that will be hidden once the TV is mounted. Use a router or hole saw to create an access point for cables.

2. Frame the Wall

  • Build a frame using timber: Use 2x1 dressed timber or suitable cut-offs to create a timber framework on the wall. This creates a recess behind the backboard (approx. 18mm, matching the board thickness).

  • Leave a 50mm border: Position framing timber at least 50mm in from each edge of the backboard to keep it hidden once installed.

  • Pack out the center: Add support in the center area to prevent the board from flexing or bowing when screwed to the wall.

3. Mark Stud Locations

  • Use a stud finder to locate studs in the wall.

  • Mark the stud positions on the floor or base of the wall using masking tape for reference when placing the board.

4. Mount the Backboard

  • Position the backboard: Rest it on a stable support to hold it in place during installation (e.g. blocks or a second person).

  • Align with the studs and ensure it is level.

  • Fix the board to the wall: Screw through the backboard into the studs, using a minimum of 6 screws. Place screws where they will be hidden by the mounted TV.

5. Optional Add-ons

  • LED Lighting: Fit the LED strip around the back of the board in the recess created by the frame. Ensure cable management routes through the access hole.

  • TV Bracket: Install the TV bracket directly onto the front of the backboard following the bracket's own fitting guide. Ensure you screw into reinforced points of the board and framing for security.

Trustpilot