Beige Ambiance Granite - a soft, warm beige granite effect with a subtle speckled pattern that suits light and natural decor.
Black Ambiance Granite - a deep charcoal granite effect with fine, cloudy detailing for a dramatic, high-end look.

Note: These instructions assume you already have a socket in place for your fire behind the central section of your unit.

Tools & Materials Required:
• Stud finder (for stud wall installations)
• Spirit level
• Tape measure
• Pencil
• Screwdriver or drill driver
• Helper (recommended for lifting and holding unit)

This unit comes with our EasyHang rail system and all necessary fixings for stud walls included.

1. Locate your studs — ideally at three separate points where the hanging rail can be fixed.

2. Position the rail so it's level, then fix it to the wall using the wood screws and washers provided. Make sure the middle section sits flush against the wall.

3. With the help of another person, lift the unit onto the rail so that the clips catch securely.

4. From inside the unit, tighten the clip screws to lock it in place. At this stage, you can make small adjustments to ensure the unit is perfectly level.

5. For extra stability, we recommend adding a couple of additional screws through the back of the bottom panel — the section that sits flush against the wall behind your fire.

6. Unbox your fire and plug it in through the gap at the back of the unit before sliding it into position. You can remove the glass and use the side screws to fix the fire in place if desired. Set up your display logs/crystals to your taste.

7. If necessary, adjust your door hinges to align doors for that clean look.

Congratulations — you've just installed your new unit!